16 Items
Filters
  • Seven rope bracket types in black, oil rubbed bronze and brushed nickel finishes

    Rope Brackets

    Fits Large Rope

    Decorative solid brass brackets that hold rope on posts or studs for a rope railing or banister. Black, bronze or nickel finish. For decoration only.

  • Three black Spax steel lag screws with HCR coating, in different lengths, and a close-up of the head

    Lag Screw

    Best Rope Screws

    1/4 in Spax steel lag screws with an HCR (High Corrosion Resistance) coating, for holding rope in the posts of rope railings and fences. They use a T-30 Torx bit, which is not included.

  • Stainless steel eye bolts in two sizes, 1-1/2 inch and 2 inch

    Stainless Steel Eye Bolts

    Extra large 316 stainless steel eye bolts for 1-1/2 in or 2 in rope, used for bed swings and porch swings. Each safely supports 500 lb.

  • Black heat-shrink rubber handles on three ropes: tan twisted, navy braided and blue braided

    Rubber Handle

    Adhesive-lined heat-shrink tubing that you shrink onto a rope end to make a rubber handle.

  • Galvanized and stainless steel rope thimbles in two sizes, on wood planks

    Rope Thimbles

    Rope thimbles in stainless steel or hot dipped galvanized steel, standard or heavy duty. They protect the eye at the end of a rope. Thimble only, no splicing.

  • Stainless steel bed or porch swing hanging kit: swing bracket, s-hook and two screws

    Bed Swing Hanging Kit

    Stainless steel bed swing hanging kit: one bracket, one S-hook and 2 screws. Fits rope up to 2 in. Safe working load limit 500 lb.

  • Black chafe guard over eye splices on three ropes: tan twisted, navy braided and blue braided

    Chafe Guard

    A continuous tube (chafe sleeve) that slides over rope for extra abrasion protection. Choose its diameter and length.

  • Stainless steel s-hook for hanging bed swings

    Stainless Steel S-Hook

    Heavy-duty stainless steel S-hook for bed swings and large decorative ropes up to 2 in. Safe working load limit 500 lb.

  • Whipping twine colors available for end whipping rope, shown as color bands on white rope

    Whipping Twine

    Polyester diamond braid twine for wrapping (whipping) the ends of rope so they don't unravel.

  • Four climbing carabiners with locking gates

    Climbing Carabiners

    An aluminum oval climbing carabiner with a 3 stage swivel lock. 75 g, with a 24 kN (5395 lb) breaking strength and a 21 mm (0.83 in) opening.

  • 8 inch pear-shaped rigging carabiner in a gold color, with a threaded locking sleeve

    Rigging Carabiner

    An 8 in pear-shaped, all-steel rigging carabiner with a quick twist lock. Rated for 35 kN (7,800 lb), with 3,600 lb gate strength.

  • Stainless steel swing hanger bracket and two screws

    Swing Hanger Bracket

    Stainless steel swing hanger bracket with an eye bolt that swings back and forth. Pairs with our S-hook for bed swings. Safe working load limit 500 lb.

  • Five AllGear low friction rings in blue and red, in several sizes

    Low Friction Rings

    Low friction rings made from aircraft aluminum. Run rigging line around the outside or through the middle. Used in bull rope lowering lines and slings.

  • Oval rigging carabiner in a gold color, with a threaded locking sleeve

    Rigging Carabiner | Oval

    A steel oval rigging carabiner with an auto lock. 25 kN (5620 lb) breaking strength, 17 mm (0.67 in) opening, 188 g.

  • Edelrid Hand Cruiser ascender, right-hand version, black with a black and neon yellow grip

    Edelrid Hand Cruiser | Ascender

    Edelrid Hand Cruiser is a hand ascender (rope clamp) for 8.0 to 13.0 mm kernmantle ropes, in a right-hand or left-hand version. Certified to EN 12841-B and EN 567.

  • Edelrid Chest Cruiser ascender, black with a neon yellow catch, on a black strap

    Edelrid Chest Cruiser | Ascender

    Edelrid Chest Cruiser is a compact aluminum chest ascender (rope clamp) for 8.0 to 13.0 mm kernmantle ropes, with a safety lock. Certified to EN 12841-B and EN 567.

Showing 1-16 of 16 items

Add Another Item To Compare