Accessories All

Rope Brackets

Decorative solid brass brackets that hold rope on posts or studs for a rope railing or banister. Black, bronze or nickel finish. For decoration only.

Lag Screw

1/4 in Spax steel lag screws with an HCR (High Corrosion Resistance) coating, for holding rope in the posts of rope railings and fences. They use a T-30 Torx bit, which is not included.

Stainless Steel Eye Bolts

Extra large 316 stainless steel eye bolts for 1-1/2 in or 2 in rope, used for bed swings and porch swings. Each safely supports 500 lb.

Rubber Handle

Adhesive-lined heat-shrink tubing that you shrink onto a rope end to make a rubber handle.

Rope Tape

Tape for holding rope together while you cut it. A 3/4 in x 60 ft roll in black, brown or white.

Rope Thimbles

Rope thimbles in stainless steel or hot dipped galvanized steel, standard or heavy duty. They protect the eye at the end of a rope. Thimble only, no splicing.

Handheld Hot Cutter

An electric handheld rope cutter. A soldering gun with a rope-cutting tip that cuts synthetic rope and seals the end. 100 W, 120 VAC.

Chafe Guard

A continuous tube (chafe sleeve) that slides over rope for extra abrasion protection. Choose its diameter and length.

Whipping Twine

Polyester diamond braid twine for wrapping (whipping) the ends of rope so they don't unravel.

Climbing Carabiners

An aluminum oval climbing carabiner with a 3 stage swivel lock. 75 g, with a 24 kN (5395 lb) breaking strength and a 21 mm (0.83 in) opening.

Rigging Carabiner

An 8 in pear-shaped, all-steel rigging carabiner with a quick twist lock. Rated for 35 kN (7,800 lb), with 3,600 lb gate strength.

Rope Bags

AllGear canvas rope bags that hold 200 ft of 1/2 in climbing rope. With webbing handles and a drawstring closure.