An electric handheld rope cutter. A soldering gun with a rope-cutting tip that cuts synthetic rope and seals the end. 100 W, 120 VAC.
- U.S. orders placed by 3 pm ET on a business day ship the same day. We're closed weekends and a few holidays.
- Our average rating across all Right Rope products, from 900+ verified reviews. Read reviews (opens in a new tab)
- Not sure what you need? Open the chat button on this page and a rope expert will help you choose.
Great for
- Quick, simple cuts of a few pieces at a time.
- It cuts and seals the end in one step. Our own synthetic ropes are hot cut and sealed with a similar cutter.
Also for this job
Specs
Description
The Handheld Hot Cutter is an electric soldering gun with a rope-cutting tip that cuts synthetic rope and seals the end in one step. It has a 1-1/2 in cutting blade and weighs 2 lb, so it's easy to carry. Our own synthetic ropes come hot cut and sealed with a similar cutter, and this one is for cutting a piece shorter, a few pieces at a time. To hold the rope together while you cut, use Rope Tape.
- Made for synthetic rope
- Not for continuous use. Cool it 4 minutes for every minute of use
- Clamp or hold both sides of the rope as you cut
- 4 ft power cord. 100 W, 120 VAC, 60 Hz, 1 amp
Questions
Using it
How long can I run it?
The instructions say it is not for continuous use. Never run it more than 60 seconds without letting it cool. Allow 4 minutes of cooling for every 1 minute of use.
Any tips for a clean cut?
Clamp or hold both sides of the rope in place as you cut.
What are the specs?
1-1/2 in cutting blade, 4 ft power cord, 2 lb. It is rated 100 W, 120 VAC, 60 Hz, 1 amp.
