• Premium climbing rope
• 7000 lbs strength
• Rated for 2 350 lb hunters
• Highly Durable Sheath
• 24-strand braded high-tenacity polyester cover
• Highest Strength Core
• 12-strand braided high-tenacity nylon core
• Distinctive tree bark blended camouflage
• Made in USA from domestic, and some international, materials

Instructions for Use  |  ZOOK™ Tether (3:40)

For Hang On Tree Stands and Ladder Stands:

1. While standing in your tree stand, attach the ZOOK™ Tether above your head by wrapping the rope around the tree and passing the end of the rope and the prusik cord through the looped end to form a choker hitch around the tree.
2. Cinch the choker hitch to tighten it so that the rope around the tree is horizontal.
3. Once tight, pull down sharply to be certain the ZOOK™ Tether is gripping the tree properly.
4. Attach the carabiner to the lanyard of your harness and to the prusik cord.
5. Push the prusik up the rope until it is a few inches below the choker hitch.
6. Test the function of the prusik by sharply pulling down on it to be sure it locks up.
7. Make sure that there is just enough slack in your lanyard so you can comfortably sit down.

For Climber Tree Stands:

1. While standing in your climber at the base of the tree, attach the ZOOK™ Tether above your head by wrapping the rope around the tree and passing the end of the rope and the prusik cord through the looped end to form a choker hitch around the tree
2. Cinch the choker hitch to tighten it so that the rope around the tree is horizontal.
3. Once tight, pull down sharply to be certain the ZOOK™ tether is gripping the tree properly.
4. Attach the carabiner to the lanyard of your harness and to the prusik cord.
5. Push the prusik up the rope until it is a few inches below the choker hitch.
6. Test the function of the prusik by sharply pulling down on it to be sure it locks up.
7. Begin climbing, stopping after every step to raise the ZOOK™ Tether as high as you can reach, repeating steps 2-7.
8. Once in your final position, raise the ZOOK™ Tether once more so that there is just enough slack in your lanyard so you can comfortably sit down.

For Saddle Hunting:

1. Once you reach your desired elevation using your method of climbing with your saddle, attach the ZOOK™ Tether above your head by wrapping the rope around the tree and passing the end of the rope and the prusik cord through the looped end to form a choker hitch around the tree
2. Cinch the choker hitch to tighten it so that the rope around the tree is horizontal.
3. Once tight, pull down sharply to be certain the ZOOK™ Tether is gripping the tree properly.
4. Attach the carabiner to the lanyard of your harness and to the prusik cord.
5. Push the prusik up the rope until it is a few inches below the choker hitch.
6. Test the function of the prusik by sharply pulling down on it to be sure it locks up.
7. Make sure that there is just enough slack in your lanyard so you can comfortably sit down.